Each kit of WonderJuice contains three items:1. Jar of organic solution2. Packet of potassium mix (K)3. Packet of phosphorus mix (P)
What else you will need:1. Three 1-gallon containers2. Tap water3. One 1-cup measuring cup4. One 1-tablespoon measuring spoon
Here are the steps for creating WonderJuice Working Solution:1. Fill one 1-gal bottle with tap water and empty the entire contents of the potassium mix (K) into it. Shake well. Label this container K for reference.2. Fill one 1-gal container with tap water and empty the entire contents of the phosphorus mix (P) into it. Shake well. Label this bottle P for reference.3. Pour 1cup from P and 1cup from K into the empty working solution (WJ) container.4. Fill the measuring cup ¾ full of water and then add 1Tbs (14.79mL) from the jar of organic solution and stir into the water to ensure all organic solution is mixed in.5. Empty the measuring cup into the working solution (WJ) container and fill the remainder of the working solution (WJ) container with tap water shake well.6. Apply 1cup of the Wonderjuice working solution to plants. Add ½cup for plants over 3ft tall. For starter plants, use less and increase as plants get larger in size. Trees and bushes should start with 1-cup and increase up to 2-cups.7. Repeat every 5-7 days. >>>You can multiply or divide the ingredients to make smaller or larger batches.
>>>Keep the mineral mixes separate from the organic solution until you are ready to make the working solution.
If you make working solution in advance, do not leave a large quantity of airspace, as it can cause mold. If mold occurs, it will not have any impact on the effectiveness of the solution. Discard only the portion with mold and use the remaining working solution as directed above. .
